Sanyo PLC-XU4000 Owner's Manual download pdf (Page 6)

Safety Instructions

Openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it

from overheating, these openings must not be blocked

or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using

or installing the projector, the following precautions

should be taken.

– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic parts. These areas will

become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause

fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

– Do not drop or bump the projector, otherwise

damages or malfunctions may result.

– When carrying the projector, use a suitable carrying

case.

– Do not transport the projector by courier or any

other transport service in an unsuitable transport

case. This may cause damage to the projector.

For information about transporting the projector by

courier or any other transport service, consult your

dealer.

– Do not put the projector in a case before the projector

is cooled enough.

Moving the Projector

When moving the projector, replace the lens cap and

retract adjustable feet to prevent damage to the lens

and cabinet.

When the projector is not in use for an extended

period, put it into the supplied carrying case with the

lens side up.

Air Circulation

Air Intake Vent

Air intake Vent

Exhaust Vent

(Hot air exhaust)

Do not pitch the projector more than

40 degrees from above and below.

Do not point the projector up to project an

image.

Do not point the projector down to project

an image.

Do not put the projector on either side to

project an image.

Install the projector properly. Improper Installation

may shorten the lamp life and cause a fire hazard.

Installing the Projector in Proper

Position

Exhaust Vent

(Hot air exhaust)

Do not roll the projector more than

20 degrees from side to side.

20°

40°

Air intake Vent

CAUTION

The carrying case (supplied) is intended for protection

against dust and scratches on surface of the cabinet,

and it is not designed to protect an appliance from

external forces. Do not transport the projector by

courier or any other transport service with this case,

otherwise the projector can be damaged. When

handling the projector, do not drop, bump, subject it to

strong forces, or put other things on the cabinet.

1 2 3 4 5 6 7 8 9 10 11 ... 77 78

Comments to this Manuals

No comments

Sanyo PLC-XU4000 Owner's Manual Page 6

Comments to this Manuals