Sanyo PLC-WM5500 User Manual download pdf (Page 14)

Chapter 2 Setup Procedures

The Network PIN code is to restrict the access to the projector through the network.

After setting the Network PIN code, you need to enter it to operate the projector via the

networks.

Network PIN code

Network information

1. Select "Network PIN code" in the Network menu, and press SELECT button.

The Network PIN code screen will appear.

2. Set the Network PIN code.

Set the figures with the Point ed buttons and move to the next items with the Point 7

8 buttons. Select “Set” and press SELECT button to set. To cancel the preset Network PIN

code, select “Cancel”. When you do not want to set the Network PIN code, set "0000".

It is recommended to set the Network PIN code if you use the projector via the networks.

The Network PIN code can be set also through the networks. See “3. Basic setting and

operation” ➔“Initial setting” ➔“Network PIN code setting” (p.23).

Select "Network information" in the Network menu and press Point 8 or SELECT button

to show LAN setting environment of the currently selected projector. (The description

below is an example and different from what will be shown.)

Network PIN code

Network PIN code screen

* The numerical value is a setting example.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Sanyo PLC-WM5500 User Manual Page 14