Sanyo VA-SW8000 User Manual download pdf (Page 37)

English 36

Watching Live Video

b Sequential Switching Mode

When you are connected to a 4-channel DVR, you can use Sequential Switching mode to monitor in

turn each of the cameras connected to the four channels.

View the live video as usual.

Select the desired camera from the tree

list, and watch the live video from the

DVR in the single-view or four-view

layout.

Click (one of the layout selector

buttons on the control panel).

The software switches to Sequential

Switching mode; it cycles through the

cameras according to the numbers of the

channels they are connected to, and

displays in a single view the video stream

from each camera one after another.

This behavior loops until you exit from

Sequential Switching mode.

To exit from Sequential Switching

mode:

Click again to exit from Sequential

Switching mode. You are returned to the

layout you were working in before

switching to Sequential Switching mode.

• This feature is only available when you are connected to a 4-channel DVR.

• You cannot use Sequential Switching mode when you are connected to a single-channel DVR.

To configure the length of intervals

at which the cameras are

switched, use the [Options]

window under the Initial Set

menu. For more information, see

P73.

When there is a channel with a

“VIDEO LOSS” placeholder, it is

displayed as it is; however, when

there is a channel with a “MASK”

or “NO VIDEO” placeholder, it is

skipped and not displayed.

CH1 CH2

CH4 CH3

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 131 132

No comments

Sanyo VA-SW8000 User Manual Page 37