Sanyo VA-SW8000 User Manual download pdf (Page 76)

75 English

Initial Set Menu (Required user access level: ID4)

● Network Extension Mode

By default, the DVR Utility Software

supports up to 1,000 DVRs connected to

the network. If you want to connect more

DVRs to the network, you can activate the

network extension mode, in which you can

connect up to 4,000 DVRs. To do so, follow

these steps:

7 NETWORK INTERFACE CARD (NIC)

This drop-down list contains network

interface cards installed in your system.

Choose one network interface card from

the list.

8 USE MORE THAN 1001 DVRS

To switch to the extension mode, select the

“USE” radio button.

• USE:

Sets the number of DVRs to 1,001 or

more (extension mode)

• NO USE (default):

Sets the number of DVRs to within 1,000

9 MAX NUMBER OF UNITS

Once you have activated the extension

mode (by selecting USE), you can specify

the maximum number of DVRs. When you

open the drop-down list, it displays several

choices for the number of DVRs that can be

connected based on the value of the

network interface card’s subnet mask.

Choose the most suitable choice.

F Control buttons

• :

Before you click [OK], you can cancel

your changes by clicking this button.

• :

Applies and saves your changes.

Subnet mask value

Number of

DVRs connected

255.255.252.0 Up to 1,000

255.255.248.0 1,001 - 2,000

255.255.240.0 2,001 - 4,000

For the system to correctly operate, one

of the above three subnet mask values

must be chosen.

When you are done, click [OK] to save

your changes.

Some settings do not take effect until

you quit the DVR Utility Software and

reboot the computer.

☞Settings that take effect immediately

when you click [OK]:

• DOWNLOAD AUTHORITY

• AUTO CLOCK ADJUST TIME

• SEQUENCE

☞Settings take effect after the

computer is rebooted:

• LANGUAGE

• TV SYSTEM

• PC TYPE/MASTER CONTROL PC

• NETWORK INTERFACE CARD

• Network extension mode

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 131 132

Comments to this Manuals

No comments