Sanyo VA-SW8000 User Manual download pdf (Page 38)

37 English

Recording Monitored Video

Live video streamed from a monitored camera can be recorded into the DVR’s internal hard disk.

• You can choose from three recording modes: manual, timer, and alarm.

• The recording mechanism works on the entire DVR. Because of this, when you are connected to

a 4-channel DVR, the video streams from all the four cameras are recorded at the same time,

even if you specify the camera title of one camera.

• To record the sound part in the video as well, go to the REC MODE SET tab of the [DVR Set]

window and turn on [AUDIO RECORDING]. For more information, see P106.

• When you attempt to start manual or timer recording by clicking the corresponding

button, you are presented with a confirmation dialog. Confirm whether or not to start

recording. This dialog is intended to prevent you from inadvertently recording an

unwanted video stream.

b Manual recording (required user access level: ID3/4)

You can manually record live video from monitored cameras.

● Basic Operating Steps

Display live video.

When in the multi-view layout, specify the

sub-pane that is displaying the video you

want to record by clicking its title bar.

Click on the control panel.

D symbol appears on the title bar, and

the DVR starts recording the live video.

Whichever layout is currently applied to

the viewing pane, video streams are

recorded from all the cameras connected

to the DVR.

To stop recording, click on the

control panel.

The

D symbol disappears from the title

bar, and the DVR stops recording.

You can manually record live video in

Sequential Switching mode.

You cannot start manual recording

while the DVR is on timer standby or

during timer recording.

2 3

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 131 132

No comments

Sanyo VA-SW8000 User Manual Page 38