Sanyo VA-SW8000 User Manual download pdf (Page 72)

71 English

Using the Tool Menu Options

4 MENU UPLOAD

(Required user access level: ID4)

You can simultaneously update the menu

files on all the DVRs by doing the following:

1 Click [Browse..].

A dialog opens that displays a list of

referenced files.

2 Select the menu file you want to

broadcast, and click [Open].

The [FILENAME] box is populated with

your specified file name.

3 Turn on or off the [COPY TITLE /

MOTION SETTINGS] check box.

This check box lets you choose

whether to broadcast the camera title

and motion sensor settings configured

on the TITLE/MOTION SET tab of the

[DVR Set] window. To broadcast the

information, select the check box.

4Click .

The menu file information is broadcast

to all the DVRs, and they

simultaneously update their menu

information.

5 CLOCK SET (Required user access

level: ID4)

Broadcasts the [Clock Set] command to all

the DVRs, equivalent to using the [Clock

Set] window under the DVR Management

menu.

Clicking instructs all the DVRs to

synchronize their internal clocks with your

computer's internal clock.

6 SYSTEM UPDATE

(Required user access level: ID4)

You can broadcast the [SYSTEM UPDATE]

command, which is equivalent to using the

[System Update] window under the DVR

Management menu, by doing the following.

Note that this broadcasts firmware updates

to all the DVRs.

1 Click [Browse..].

Choose which button to click based on

the model of the connected DVRs.

Types of button:

For DSR-M800, DSR-M804,

DSR-M810, and DSR-M814

When you click the button, a dialog opens

that displays a list of referenced files.

2 Select the firmware file you want to

broadcast, and click [Open].

The boxes that correspond to the

models of the connected DVRs are

populated with your specified file name.

3Click .

The firmware file information is

broadcast to all the DVRs, and they

simultaneously update their firmware.

The menu file you plan to broadcast

must be stored on your computer's

hard disk before you can broadcast

it. For more information, see P102.

The firmware file you plan to

broadcast must be stored on your

computer’s hard disk before you can

broadcast it.

• Do not use any other firmware file

than supplied from SANYO; doing so

may possibly damage the DVRs.

• Before you can update the firmware,

the DVR(s) must stop any playback or

recording session and the DVR Utility

Software must display live video.

• The update process takes a few

minutes. Do not turn off the power or

disconnect your computer from the

network while the update process is

in progress.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 131 132

Comments to this Manuals

No comments