Sanyo CL4232 User Manual download pdf (Page 47)

– 47 –

SM830078

11. PROCESSES AND FUNCTIONS

Fig. 8

(1) Room Temperature Control

The Unit adjusts room temperature by turning the outdoor unit’s compressor ON and OFF.

This process is controlled by the thermostat located in the remote control unit.

The figures on this and the next pages show how each part of the system performs when the

room temperature changes and the thermostat activates the compressor to start (thermo ON)

or stop (thermo OFF). Fig. 8 shows about the cooling cycle.

Chart Summary and Explanations

❑ Once the compressor starts, it keeps running for 5 minutes.

❑ Once the compressor stops, it will not start running again for 3 minutes.

❑ If you change the operation mode during the cooling cycle, the control circuit stops the

compressor for 3 minutes.

❑ For 5 minutes after the compressor is first turned on, and for 3 minutes after it is turned off,

the compressor is not controlled by the room sensor.

❑ Thermo ON: When room temperature rises 1 °F above the set temperature T˚, (T ˚+1 °F):

Compressor ➞ ON

❑ Thermo OFF: When the room temperature is equal to or below the set temperature T˚:

Compressor ➞ OFF

THERMO ON

ROOM TEMPERATURE

THERMO ON

S. T.+ 1°F

SET TEMP. T°F

(S.T.)

COMPRESSOR

OFF

WITHIN 3 MINUTE

MORE THAN

5 MINUTES

ON ON

1028_X_S

OFF OFF

INDOOR FAN

OUTDOOR FAN

SET SPEED (MANUAL)

THERMO OFF

3 MINUTES

THERMO OFF

MORE THAN 3 MINUTES

ON ON

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Comments to this Manuals

No comments

Sanyo CL4232 User Manual Page 47

Comments to this Manuals

Related products and manuals for Conditioners Sanyo CL4232