Sanyo TLS-9024P User Manual download pdf (Page 12)

CHANGING THE ON-SCREEN DISPLAY

Selecting the On-screen Display

You can select to display or not the date, time, the

number of alarm recordings and tape speed.

1 Turn the power on to all devices used.

2 Press the MENU button until the (SET UP 2) menu

is displayed.

@@@@@@@<SET@UP@2>

öDISPLAY

@@@DATE@@@@@@@@@@@Y

@@@TIME@@@@@@@@@@@Y

@@@ALARM@COUNT@@@@Y

@@@SPEED@@@@@@@@@@Y

öBUZZER

@@@ALARM@IN@@@@@@@Y

@@@TAPE@END@@@@@@@Y

@@@KEY@IN@@@@@@@@@N

@@@WARNING@@@@@@@@Y

3 Turn the JOG dial clockwise, until the desired item

for which the display function will be set is flashing.

4 Turn the SHUTTLE ring to set “Y” for the functions

described below.

DATE . . . . . . . . . . . The date is displayed

TIME . . . . . . . . . . . . The time is displayed

ALARM COUNT . . . The number of alarm

recordings is displayed

SPEED . . . . . . . . . . The recording/playback

speed mode is displayed

5 Press the SEARCH/AUDIO ON button to save the

settings.

NOTE:

œ If the ON SCREEN switch is set to the “ON” position,

the items for which “Y” is set are recorded. The items

for which “N” was set at step 4 above are not

recorded.

Changing the Date/Time Display

Position

1 Turn the power on to all input devices to the VCR.

2 Set the ON SCREEN switch to the “ON” position.

The date and time are displayed.

15-10-99@FRI@000

15:20:00@@@3

3 Press the SHIFT « (or ]) button.

The display will move towards the right (or the

bottom).

NOTES:

œ If the SHIFT « (or ]) button is kept pressed for 1

second or more the display will move at a faster

speed.

œ The display position cannot be changed while

recording.

RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000

English 11

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Comments to this Manuals

No comments

Sanyo TLS-9024P User Manual Page 12

Comments to this Manuals

Related products and manuals for Video recorders Sanyo TLS-9024P