Sanyo TLS-9024P User Manual download pdf (Page 25)

RECORDING USING AN EXTERNAL TIMER

INPUT

Recording can be controlled by an external start/stop

signal input at the EXT TIMER IN terminal.

Example 2: To record using the signal input at the

EXT TIMER IN terminal, in 24-hour

mode.

œ Follow the Before starting steps, under “NORMAL

RECORDING”.

NOTE:

œ External timer input recording can only be set on the

9th line (EXT) of the (TIMER SET) menu.

1 Press the MENU button until the (TIMER SET)

menu is displayed.

2 Turn the JOG dial, until “EXT” (External) setting is

flashing.

The “SPD” (recording speed) position will start

flashing.

3 Turn the SHUTTLE ring to select the recording

speed mode (ex: 24), then turn the JOG dial

clockwise.

“N” will start flashing.

4 Turn the SHUTTLE ring to select “Y”.

@@@@@@<TIMER@SET>

WEEK@START@@STOP@@@SPD

SUN@@--:--@@--:--@@---@N

MON@@--:--@@--:--@@---@N

TUE@@--:--@@--:--@@---@N

WED@@--:--@@--:--@@---@N

THU@@--:--@@--:--@@---@N

FRI@@--:--@@--:--@@---@N

SAT@@--:--@@--:--@@---@N

DLY@@--:--@@--:--@@---@N

EXT@@ööööö@@ööööö@@@24@Y

5 Follow steps F and G under “PROGRAMME

TIMER RECORDING on page 21”.

When an external signal is input, “E” will light

on the digital display and recording will take

place.

NOTES:

œ Other timer recordings using the standard procedure

can also be programmed.

œ The external input signal must be input at the EXT

TIMER IN terminal.

RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000

24 English

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 38 39

Comments to this Manuals

No comments

Sanyo TLS-9024P User Manual Page 25

Comments to this Manuals

Related products and manuals for Video recorders Sanyo TLS-9024P