Sanyo TLS-9024P User Manual download pdf (Page 30)

SETTING THE BUZZER

A buzzer can be set to sound during alarm recording, if

during recording the tape reaches the end, if buttons

are pressed or if there is a mechanical failure that

causes the tape to stop or be ejected, etc.

1 Press the MENU button until the (SET UP 2) menu

is displayed.

@@@@@@@<SET@UP@2>

öDISPLAY

@@@DATE@@@@@@@@@@@Y

@@@TIME@@@@@@@@@@@Y

@@@ALARM@COUNT@@@@Y

@@@SPEED@@@@@@@@@@Y

öBUZZER

@@@ALARM@IN@@@@@@@Y

@@@TAPE@END@@@@@@@Y

@@@KEY@IN@@@@@@@@@N

@@@WARNING@@@@@@@@Y

2 Turn the JOG dial, until the desired item for which

the buzzer function will be set is flashing.

3 Turn the SHUTTLE ring to set “Y” for the functions

described below.

ALARM IN. . . The buzzer will be heard during

alarm recording.

TAPE END . . The buzzer will be heard when

the end of the tape is reached

during recording. To stop the

buzzer, press the STOP, EJECT

or PLAY button, or turn the

SHUTTLE ring.

KEY IN . . . . . The buzzer will be heard when

one of the VCR buttons is

pressed or when the JOG dial or

the SHUTTLE ring is turned.

WARNING . . The buzzer will be heard if the

heads are dirty and recording

qualtiy deteriorate, or if the tape

stops or is ejected due to a

problem with the internal

mechanism. To stop the buzzer,

press the STOP button.

4 Press the SEARCH/AUDIO ON button to save the

setting.

NOTES:

œ If “N” is set, the buzzer will not be heard.

œ During timer recording mode, security lock engaged

mode and alarm recording mode, the buzzer will not

be heard when a button related to one of these

modes is pressed, even if “Y” is set for the “KEY IN”

item.

RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000

English 29

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

Comments to this Manuals

No comments

Sanyo TLS-9024P User Manual Page 30

Comments to this Manuals

Related products and manuals for Video recorders Sanyo TLS-9024P