Sanyo TLS-9024P User Manual download pdf (Page 21)

ALARM RECORDING

Alarm Search

To go to the beginning of a desired alarm recording.

1 Press the SEARCH/AUDIO ON button during stop

mode.

“AL SEARCH 01” will be displayed on screen.

2 Press the REC/PLAY SPEED l (or j) button to set

the desired alarm number (1 to 99), then turn the

SHUTTLE ring clockwise (or counterclockwise).

The desired alarm is searched and a still

image of the beginning of the alarm recording

will appear on-screen.

NOTE:

œ The alarm number is relative to the actual tape

position. (Please refer to the illustration below.)

3 Press the PLAY button.

Playback will start.

Alarm Scan

To look for an alarm recording by viewing the first 5

seconds of each alarm recording.

1 Press the SEARCH/AUDIO ON button twice during

stop mode.

“AL SCAN” will be displayed on screen.

2 Turn the SHUTTLE ring clockwise (or

counterclockwise).

The unit will advance (or rewind) the tape at

high speed and playback the first 5 seconds of

every alarm recording.

To cancel the alarm scan mode, press the

STOP

button.

3 While the desired recording is being played back,

press the PLAY button.

Playback will start, alarm scan mode is

cancelled.

Playback

112

Rewind direction

Fast-forward direction

Actual position

Alarm number 2

Alarm trigger input point

RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000

20 English

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 38 39

Comments to this Manuals

No comments

Sanyo TLS-9024P User Manual Page 21

Comments to this Manuals

Related products and manuals for Video recorders Sanyo TLS-9024P