Sanyo CG1411 User Manual download pdf (Page 92)

Special Remarks

‘‘DRY’’ ( ) Operation

How it works?

•

Once the room temperature reaches the level that was set, the unit

repeats the cycle of turning on and off automatically.

•

During DRY operation, the fan speed is automatically set to LOW or

VERY LOW; the fan speed then switches back and forth between LOW

(for 20 seconds) and VERY LOW (for 10 seconds).

•

‘‘DRY’’ operation is not possible if the indoor temperature is 59 °F or

less.

Heating ( ) Operation

Heating performance

•

This air conditioner is a refrigerant heating type unit which uses

combustion gas to heat the refrigerant heater during heating operation.

The heating capacity is unaffected depending on the outdoor

temperature. However, if sufficient heat cannot be obtained with this air

conditioner, use another heating appliance in conjunction with it.

Power failure

during operation

•

In the event of power failure, the unit will stop. When the power is

turned on again, the unit restarts within three minutes.

Clicking Sound

Clicking sound is

heard from the air

conditioner

•

In heating or cooling operation, any plastic parts may expand or shrink

due to a sudden temperature change. In this event, a clicking sound

may occur. This is normal, and the sound will soon disappear.

Remote Control Unit

•

The remote control unit sends the setting condition to the air

conditioner regularly at three minute intervals.

20 OI-202-20EG

oi202000

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 98 99 100

No comments

Sanyo CG1411 User Manual Page 92