Sanyo CG1411 User Manual download pdf (Page 97)

Care and Cleaning (continued)

Anti-mold filter The anti-mold filter behind the air intake grille should be checked and

cleaned at least once every two weeks.

How to remove the

anti-mold filter

1. Grasp both ends of the

air intake grille and pull

it out and up.

2. Push the anti-mold

filter up slightly, and

then pull

it down.

Cleaning Use a vacuum cleaner to remove light dust. If there is sticky dust on the

filter, wash the filter in lukewarm, soapy water, rinse it in clean water and

dry it.

How to replace the

anti-mold filter

1. With the ‘‘FRONT’’ mark facing

you, slide the anti-mold filter

up into the unit and then lower

the handle into the groove on

the unit.

2. After installing the anti-mold

filter, press the locations

marked by the arrows (

)

and close the air intake grille.

Air intake grille

Anti-mold filter

Air intake grille

Anti-mold

filter

Insert into the groove on the unit.

25OI-202-25EG

oi202000

1 2 ... 92 93 94 95 96 97 98 99 100

No comments

Sanyo CG1411 User Manual Page 97