Sanyo PLC-EF60A Owner's Manual download pdf (Page 48)

Press the SELECT button at the D. Zoom –. The message “D.

Zoom –” is displayed. Press the SELECT button to compress the

image size.

D. Zoom –

Ceiling

Rear

When this function is “On,” the picture is top/bottom and left/right

reversed. This function is used to project the image from a ceiling

mounting the projector.

When this function is “On,” the picture is left/right reversed. This

function is used to project the image to a rear projection screen.

Press the SELECT button at the D. Zoom +. The message “D.

Zoom +” is displayed. Press the SELECT button to expand the

image size. And use the Point buttons (e, d, 7, and 8) or the

Control pad to pan the image. The Panning function can work

only when the image is larger than the screen size.

D. Zoom +

Ceiling

Rear

✔Note:

• The True and D. Zoom +/– cannot be selected when projecting AV sources or

selecting 480i, 575i, 480p, or 575p in the System menu. (p.38~39)

• This projector cannot display any resolution higher than 1600 x 1200. If your

computer’s screen resolution is higher than 1600 x 1200, reset the resolution to the

lower before connecting the source to the projector.

• The image data in other than XGA (1024 x 768 for PLC-XF60A) or SXGA (1400 x

1050 for PLC-EF60A) is modified to fit the screen size in initial mode.

• The panning function may not operate properly if the computer system prepared in

the PC Adjust Menu is used.

D. Zoom

This function corrects distortion of a projected image. Press the

SELECT button at Keystone and the keystone dialog box appears.

Adjust keystone with the Point buttons (e, d, 7, and 8) or the

Control pad.

Press the Point 8 button or the Control pad at Keystone and

select either Store or Reset with the Point buttons (e and d) or

the Control pad, and then press the SELECT button to fix the

selection.

Store . . . .stores the keystone adjustment even if the AC

power cord is disconnected.

Reset . . . . .resets the keystone adjustment when the AC power

cord is disconnected.

Keystone

✔Note:

To exit the D. Zoom +/– mode, try the followings:

• To return to the normal screen, change Input, or change the screen size.

• To exit the panning mode, press any button except the D. ZOOM button, the

SELECT button, and the CH and ID buttons.

Screen Setting

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 81 82

Comments to this Manuals

No comments

Sanyo PLC-EF60A Owner's Manual Page 48

Comments to this Manuals

Related products and manuals for Data projectors Sanyo PLC-EF60A