Sanyo PLC-WTC500AL Owner's Manual download pdf (Page 62)

Factory default

This function returns all setting values except for the user

logo, PIN code lock, Logo PIN code lock, lamp counter, and

filter counter to the factory default settings.

Exit the Setting Menu.

Quit

Select Factory default and this

box appears. Select [Yes], and

the next box appears.

Select [Yes] to

activate it.

Factory default

Setting

Filter counter

This function is used to set a time for the filter replacement.

Use the Point ed buttons to move the red frame pointer to Filter

counter and then press the SELECT button. A dialog box appears

showing the Used time option and the Scrolls remaining option.

Used Time . . . . . . Show the total accumulated time of the

filter use, timer setting option and the Reset

options. When the projector reaches a time

set in the timer setting, the Filter replacement

icon (Fig. 1) appears on the screen and the

total accumulated time turns red, indicating

that the filter replacement is necessary. If

the filter is out of scroll and the projector

reaches a time set in the timer setting, Fig.

2 appears on the screen, indicating that the

filter cartridge replacement is necessary.

Scrolls remaining

. . Show the scroll counter and the Reset

options. When the filter scroll is counted

down to 1 (Scroll counter on the screen is

showing “0 scroll(s)” , the last scroll icon

(Fig. 3) appears on the screen. When the

filter scroll is counted down to 0, the Filter

cartridge replacement icon (Fig. 4) appears

on the screen and the WARNING FILTER

indicator lights orange, indicating that the

filter cartridge replacement is necessary.

To set a timer, press the SELECT button on Used time option.

Move the red arrow pointer to the timer setting option and use

the Point 7 8 buttons to select from (Off/ 400H/700H/1000H)

depending on the use environment.

When replacing the Filter cartridge, reset the Filter counter and the

Scroll counter (p.65).

Filter replacement icon appears on the screen

at a set time.

Fig.1 Filter replacement icon

Filter cartridge replacement icon appears on

the screen when the filter scroll is counted

down to 0 scroll.

Fig.4 Filter cartridge replacement icon

Set the red frame pointer to the item

and press the SELECT button

Last scroll icon appears on the screen when

the filter is down to the last scroll.

Fig.3 Last scroll icon

Use the Point 7 8 buttons

to set the timer. Select from

(Off/ 400H/700H/1000H)

depending on the use

environment

Fig.2

✔Note:

 •DonotresettheFiltercounterandtheScrollcounterwithout

replacingtheFiltercartridge.BesuretoresettheFiltercounter

andtheScrollcounteronlyafterreplacingtheFiltercartridge.

 •Timersettingnotifiesthatthefilterneedsreplacement.To

replacethefilter,usethefiltercontrolfunction(p.54).

✔Note:

 •Fig.1,Fig. 2, Fig.3orFig. 4 willappearatturning

onandselectinginputsource.

 • Fig.1, Fig. 2, Fig. 3 or Fig. 4 will not appear when

theDisplayfunctionissetto“Off”(p.54),orduring

“Freeze”(p.30).

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 88 89

Comments to this Manuals

No comments

Sanyo PLC-WTC500AL Owner's Manual Page 62

Comments to this Manuals

Related products and manuals for Film projectors Sanyo PLC-WTC500AL