Sanyo PLC-WTC500AL Owner's Manual download pdf (Page 70)

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that

contains a small amount of non-abrasive camera lens cleaner,

or use a lens cleaning paper or commercially available air

blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive

cleaners, solvents, or other harsh chemicals might scratch

the surface of the lens.

When the projector is not in use, replace the lens cap.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning

cloth. When the cabinet is heavily soiled, use a small

amount of mild detergent and finish with a soft dry cleaning

cloth. Avoid using an excessive amount of cleaner. Abrasive

cleaners, solvents, or other harsh chemicals might scratch

the surface of the cabinet.

When the projector is not in use, put the projector in

an appropriate carrying case to protect it from dust and

scratches.

Cleaning the Projection Lens

Maintenance and Care

CAUTION

Do not use any flammable solvents or air sprays

on the projector and in its vicinity. The explosion or

fire hazard may occur even after the AC power cord

is unplugged because the temperature inside the

projector is extremely high due to the lamps.

In addition, there is a risk that the internal parts

may be damaged not only by the flammable air

spray but also by the cold air.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 88 89

No comments

Sanyo PLC-WTC500AL Owner's Manual Page 70