Sanyo Welder MCO-19M(UVH) User Manual download pdf (Page 13)

Control panel and keypad

1. Upper limit regulator:

This regulator is used to set the upper

temperature limit.

2. OVERHEAT indicator:

This indicator lights when the chamber

temperature reaches the upper limit.

3. MENU Key:

Press this key to access the menu.

4. Contrast knob:

Turn this knob to adjust the contrast of the

LCD.

5. BUZZER Key:

Press this key to silence the buzzer.

Note:

It is not possible to silence the

buzzer for an upper limit temperature

alarm.

6. CE Key:

Press this key to clear the entered value

when entering a setting.

7. Cursor Keys (Up, Down, Left, and Right):

Use these keys to move the cursor on the

LCD panel.

8. ENTER Key:

Press this key to select a menu command.

When entering a setting, pressing this key to

move to the next parameter.

9. Numeric Keys

10. H

Key:

Press this key to start H

decontamination.

Refer to page 49 for details.

※ The following optional components must be installed to perform decontamination.

・UV Lamp Add-on Kit (MCO-19UVS) (This is provided as standard equipment for the MCO-19M(UV).)

・H

Decontamination Kit (MCO-HL)

・H

Generator (MCO-HP)

LCD panel

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 77 78

No comments

Sanyo Welder MCO-19M(UVH) User Manual Page 13